Product Name: TWS

Bluetooth compatibility: Bluetooth compatible with V5.3, high-definition binaural communication

Product Speaker: F10

Working hours: 2-5 hours, the charging case can charge the earphones 3 times.

Charging time: approximately 45 minutes

Communication distance: up to 15 meters

Packaging size: approximately 10 * 8 * 3cm

Note:

Due to differences in display and lighting effects, the actual color of the item may be slightly different from the color shown in the picture. Thank you.

Due to manual measurement, please allow for a measurement deviation of 1-2cm.

2 earphones

1 charging case

1 x data cable

1 User

Wireless Bluetooth Earphone Connection Tutorial (General Steps)

1. First pairing connection (using a mobile phone as an example)

Enable headphone pairing mode

Open the charging room  Long press the power button for 3-5 seconds until the indicator light alternately flashes white/red blue.

How to avoid disconnecting headphones

1. Keep the device within a range of 10 meters


Bluetooth effective range: generally within 10 meters. Beyond this range, the signal weakens and it is easy to disconnect.     

Adjustable volume headphones

1. Check the device volume settings

Increase media volume:

Mobile/Computer: Press the volume button to adjust to maximum, or go to Settings  Sound  Ensure that the media volume is turned up.

Attention: The call volume and media volume are separate, please make sure to adjust the media volume (such as when playing music).

How to wear headphones

1. Distinguish between left and right earphones

Headphones are usually labeled with L (left) and R (right). Before wearing, please confirm the direction and avoid wearing backwards, as this may affect the fit.

2. Adjust the ear clip area

Clip design: The earphones are fixed on the auricle with elastic clip arms, and the following steps are required when wearing:

Pinch the arm with your thumb and index finger and gently stretch the elastic part.

Align the headphone unit with the ear canal and wrap the arm around the back of the auricle (similar to the position of the eyeglass legs).

Slowly release the clamp arm and let it naturally grip the ear, avoiding excessive force and preventing pressure.

How to charge and power on headphones

Confirm charging interface

Most headphones use a USB-C interface (some older models may be Micro USB)

Insert the original or compatible charging cable into the headphone charging port and connect the other end to a 5V/1A~2A adapter or computer USB port.

The headphone indicator light remains on/flashing during the charging process (usually red indicates charging, green indicates fully charged).

charging time

Usually takes 1-3 hours, please refer to the user manual for details.

It is recommended to fully charge the device before starting it for the first time